Fastest Solana Sniper Bot 2026 — 5 Bots Tested, 1 Clear Winner
Fastest Solana Sniper Bot (2026): Speed Comparison & Presets
Every “fastest bot” article online lists the same five bots and says “fast execution.” None of them answer the question that actually matters: fast at what, and with which settings?
A bot can feel fast (responsive UI) but submit transactions slowly. Or it can submit instantly but your transaction lands late because your priority fee is wrong. These are different problems with different fixes.
Finding the fastest Solana sniper bot in 2026 isn’t about one magic setting — it’s about stacking three speed layers correctly. This guide breaks down the three layers of Solana bot speed, shows you the exact official settings that control each layer, and gives you scenario-specific presets you can copy right now.
If you only change one thing: fix your fee + tip presets first. That’s 90% of “speed” for retail traders.
⚡ First Test Trade (5 Minutes)
Start small. Your first trade is a system test, not a profit attempt.
1. Create a dedicated trading wallet — never your main wallet. (Wallet setup guide)
2. Fund it with 0.3–1.0 SOL (covers trades + fees).
3. Pick one tool and set these 3 numbers:
Buy size: 0.05 SOL
Slippage: 3%
Fee + Tip budget: 0.01–0.02 SOL (start 0.01 → raise to 0.02 if trades fail)
4. Buy BONK or JUP — high-liquidity tokens only. Not a random memecoin.
🔎 Where to find the token (safe + simple)
For your first test trade, do NOT hunt random memecoins. Use established, high-liquidity tokens so the buy/sell cycle works smoothly.
Trojan: Send the ticker “BONK” or “JUP” directly to the bot chat. It returns the token with a Buy button.
Axiom: Use the search bar at the top → type “BONK” or “JUP” → click the correct result.
Verify: If unsure, search the ticker on Dexscreener → confirm Liquidity is not tiny and TXNs/Makers are active.
Rule: Search by ticker inside the bot first. Only paste contract addresses after you learn verification.
First test trade (recommended):
- JUP (Jupiter) — deep liquidity, tight spreads, reliable sells
- BONK — very liquid, easy to test buy → sell
5. Immediately sell 50%. This is the sell test — confirms the full cycle works.
If the sell fails → raise slippage to 5% and retry once. If it still fails → stop and check your slippage settings before buying anything else.
Start with 0.01 SOL total:
Trojan: /start → Settings → set Priority Fee to Fast (0.0015) + Tip to 0.0085 = 0.01 total
Axiom: Fees panel (top-right) → set Priority 0.001 + Bribe 0.009 = 0.01 total
Trades failing? Raise to 0.02: Trojan Tip → 0.0185 / Axiom Bribe → 0.019
Once this works → find coins with Dexscreener → when to sell, or scroll down for launch sniping presets and migration presets.
✅ Ready for a memecoin? Only after the JUP/BONK test works.
Pick a memecoin that meets ALL of these on Dexscreener (Trending 5M):
- Liquidity: $20K+ (prefer $50K+)
- TXNs (5M): 50+ (100+ is better)
- Makers (5M): 50–100+ (lots of unique wallets actively trading)
- Age: 3–60 min (sweet spot: 3–15 min)
- Exit check: do a small sell test immediately after buying
Where to Find Coins (Dexscreener: Last 5 Minutes)
Don’t “hunt random contracts” from Twitter replies or Telegram groups. Use a repeatable filter that surfaces coins with real activity.
✅ The simplest working workflow
Step 1: Open Dexscreener
Step 2: Select Last 5 minutes
Step 3: Select Trending → click 5M (Trending 5M)
Step 4: Filter by chain = Solana (if not already)
Step 5: Shortlist tokens that pass the filter below
Why this works: Trending 5M shows what’s getting traction right now, not yesterday’s leftovers.
✅ My Live Filter (Dexscreener Only)
I only buy coins that meet ALL of these in Dexscreener (Trending 5M). If one fails → I skip. No debate.
- Age: 3–60 min (sweet spot: 3–15 min)
- TXNs (5M): 50+ (100+ better)
- Makers (5M): 50–100+ (more unique wallets = better momentum)
- Liquidity: $20K+ (prefer $50K+)
Definition: “Mint-new” = Age ≤ 60 minutes on Dexscreener (Trending 5M).
Sweet spot (best for beginners): Age 3–15 minutes.
Avoid: Age 0–2 minutes (highest scam/chaos zone).
“But 0–1 min coins pump harder, right?”
Yes, a coin at 0–1 minutes can deliver explosive upside — if it’s legit. But here’s the reality:
- 0–1 min coins have no proven liquidity, no trading history, and the highest rug/honeypot rate. Most beginners who buy here lose everything.
- 3–15 min coins have survived the initial chaos. Liquidity is established, sell tests actually work, and sudden total dumps are far less likely.
The difference isn’t “possible profit” — it’s probability of a clean exit. Coins with established liquidity let you sell when you want to. That’s what actually makes money over time.
“No-Brain” Shortlist Filter (Beginner-Friendly)
| Metric | Minimum | Why it matters |
|---|---|---|
| TXNs (5M) | 50+ | Proves real trading is happening (not a dead chart) |
| Makers (5M) | 50–100+ | Many unique wallets actively trading — not just a few insiders |
| Liquidity | $20K+ (prefer $50K+) | Too low = slippage spikes + sells fail easily |
| Age | 3–60 min (sweet spot: 3–15) | Freshest momentum; 0–2 min = highest scam zone (beginners start at 3–15 min) |
Makers = the number of unique wallets that traded this token in the last 5 minutes. Higher Makers usually means broader participation (not just a few insiders).
Rule: I only use Makers + TXNs + Liquidity + Age in Dexscreener. That’s enough to trade fast without overthinking.
Why this filter works (simple)
- TXNs 50+ → real trading activity exists
- Makers 50–100+ → many wallets participating (momentum)
- Liquidity $20K+ → slippage + sell failures decrease
- Age 3–60 min (sweet spot: 3–15) → freshest momentum with established liquidity
BUY FILTER: Age 3–60m (sweet spot 3–15m) · TXNs(5M) 50+ · Makers(5M) 50+ · Liquidity $20K+
If Age is not in 3–60 min OR TXNs is under 50 OR Makers is under 50 → SKIP.
This filter doesn’t guarantee profit. It filters out dead charts and many trap tokens, so beginners can practice clean buy → sell cycles. This is not financial advice.
🔥 Live Trade (Real Setup) — Dexscreener Trending 5M
This is the exact “no-brain” workflow for fresh Solana memecoins.
1) Open Dexscreener → Chain: Solana
2) Set: Last 5 minutes + Trending → 5M
3) Shortlist coins that match ALL filters (TXNs 50+ / Makers 50–100+ / Liquidity $20K+ / Age 3–60 min, sweet spot 3–15)
4) Open the coin page → copy the contract → paste into your bot
If the coin doesn’t meet TXNs 50+ and Makers 50–100+, I skip. No exceptions.
Paste into your bot (fast)
Trojan: paste the contract in the bot chat → open token → Buy
Axiom: paste contract into search → open chart → Buy
After buying: do a small sell test immediately. If sell test fails → exit the idea and move on.
When to Sell (Auto-Sell Presets for Trojan, Axiom, BONKbot, Bloom & GMGN)
Buying fast is only half the job. All of these bots let you set automatic exit rules so you don’t have to stare at the chart. Set these before you buy.
Note: TP/SL orders are best-effort, not guaranteed — during rugs or illiquid tokens, your order may not fill. They’re still far better than no exits at all.
Turn Auto-Sell ON and set SL/TP first. Buying without exits = trading on emotion.
⚙ Trojan: AutoSell Profiles
Settings → AutoSell → create a profile with Take-Profit and Stop-Loss tiers.
Stop-Loss (SL): −30% → sell 100%
Take-Profit 1: +50% → sell 50% (recover initial + small profit)
Take-Profit 2: +150% → sell 50% (remaining = “moonbag”)
TP amounts must total ≤ 100%. Enable AutoSell, then set your SL/TP tiers — the bot will try to execute exits automatically based on your rules.
You can also set a dedicated slippage % for AutoSell orders (separate from buy slippage).
Nav: /start → Settings → AutoSell → Add Order → set SL/TP → assign to trades.
Manage: /start → Limit Orders → view, close individually, or Close All.
→ Open Trojan
⚙ Axiom: Advanced Trading Strategy
On the token page → toggle Advanced Trading Strategy ON → Add SL / TP rules.
Stop-Loss (SL): −30% → sell 100%
Take-Profit 1: +50% → sell 50%
Take-Profit 2: +150% → sell 50%
Axiom also supports Trailing Stop-Loss (dynamic — follows the price up, sells on pullback).
If you use Insta Trade, toggle Advanced Trading Strategy ON — it auto-attaches your SL/TP rules to every quick buy.
Global defaults: Settings → Trading → set default SL/TP for all trades.
Emergency: use the Panic Sell button on the dashboard if you spot a rug.
→ Open Axiom
⚙ BONKbot: Limit Orders (TP / SL / Trailing)
Paste token → tap Limit → set Take-Profit, Stop-Loss, or Trailing Stop-Loss.
Look for: Limit / Orders / TP / SL / Trailing
Stop-Loss (SL): −30% → sell 100%
Take-Profit 1: +50% → sell 50%
Take-Profit 2: +150% → sell 50%
BONKbot may also support Trailing Stop-Loss — check for it in your order options.
Some versions let you create preset combinations of TP + SL orders.
Nav: paste token CA → Limit → set TP/SL → confirm. Manage via Manage Positions.
→ Open BONKbot
⚙ Bloom: Auto Orders (TP / SL / Expiration)
Token page → Limit Sell → set Take-Profit %, Stop-Loss %, and expiration time.
Look for: Limit Sell / Auto Orders / TP / SL / Expiration
Stop-Loss (SL): −30% → sell 100%
Take-Profit 1: +50% → sell 50%
Take-Profit 2: +150% → sell 50%
Set order expiration if the bot asks for it (e.g. 6H, 24H).
Some versions of Bloom may show extra risk/exit options (names can differ). If you don’t see them, no problem — just use TP / SL + expiration.
Orders can be based on price % (and sometimes market cap). Multiple TP tiers may require separate orders.
Nav: token page → Limit / Limit Sell / Orders → set TP/SL → set expiration → create order.
→ Open Bloom
⚙ GMGN: Auto Sell (TP / SL / Trailing TP / Trailing SL)
/start → Settings → Auto Sell → set TP % and SL % (auto-creates limit orders on every buy).
Look for: Auto Sell / Settings / TP / SL / Trailing / Strategy
Stop-Loss (SL): −30% → sell 100%
Take-Profit 1: +50% → sell 50%
Take-Profit 2: +150% → sell 50%
TP amounts must total ≤ 100%. GMGN may also show Trailing options (name varies) — useful for fresh coins (Age 3–15m).
Some bots apply an order time limit/expiry. If GMGN asks for it, set a reasonable window (e.g. a few hours) instead of leaving it forever.
Nav (Telegram): /start → Settings → Auto Sell → add TP/SL rules.
→ Open GMGN
Note: All bot UIs can change with updates. If the exact button name differs, look for TP / SL / Limit / Strategy in your bot’s settings or trade panel.
If you can’t find TP/SL settings in a bot within 30 seconds, don’t trade that bot on fresh memecoins.
Fresh coins move too fast — manual exits are where beginners get wiped.
After you set TP/SL, confirm the order exists in Orders / Limit Orders / Positions before moving on.
Beginner Preset — Same Numbers, Any Bot
This preset works in Trojan, Axiom, BONKbot, Bloom, and GMGN. Plug in these three numbers:
Note: the numbers are universal, but execution differs by bot (Limit vs Auto vs Expiration vs Trailing). Always confirm your order is actually created.
| Setting | Value | What it does |
|---|---|---|
| Stop-Loss | −30% → 100% sell | Cuts the loss before it gets worse. Your emergency brake. |
| Take-Profit 1 | +50% → 50% sell | Recovers your initial investment + locks small profit. |
| Take-Profit 2 | +150% → 50% sell | Sells the rest at 2.5x. If it keeps pumping, you already won. |
Not setting Auto-Sell before buying. If you buy without SL/TP, you’re trading on emotion. Memecoins can drop 50% in seconds — by the time you react manually, it’s too late. Let the bot handle exits.
“But −30% SL is too tight / too loose?”
Adjust based on your style:
Aggressive (scalping): SL −15% to −20% / TP1 +30%
Standard (recommended): SL −30% / TP1 +50% / TP2 +150%
Wide (launch snipe): SL −40% to −50% / TP1 +100% / TP2 +300%
Fresh launches are more volatile — wider stops prevent getting shaken out on normal dips. Established tokens need tighter stops.
✅ If you can complete the BONK/JUP test, you can trade anything.
Most beginners lose because they skip the system test. Do it once, then use the Dexscreener filter above.
Not sure which bot to use yet? Start with our main comparison guide — it covers features, safety, and setup. This page focuses purely on speed optimization.
What “Fastest” Actually Means on Solana
When someone says a bot is “fast,” they could mean three completely different things. Understanding the difference will save you from tweaking the wrong setting.
Layer 1 — UI Response Speed
How quickly the bot reacts when you paste a contract address or tap “Buy.” Web terminals (Axiom) respond instantly in-browser. Telegram bots (Trojan, Bloom, BONKbot) add Telegram’s server round-trip — typically 100–300ms of baseline latency that has nothing to do with the bot itself.
Layer 2 — Transaction Submission Speed
How fast the bot builds, signs, and sends your transaction to Solana validators. This depends on the bot’s backend infrastructure — their RPC connections, whether they route through bundle providers like Jito, and how efficiently they construct the transaction. These are infrastructure decisions baked into each bot — you can’t change them.
Layer 3 — On-Chain Confirmation Speed
How quickly your transaction actually lands in a block. This is the layer you control through priority fees and tips. A bot with excellent Layer 2 infrastructure will still confirm late if your fee settings are too low.
Most speed issues traders experience are Layer 3 problems (wrong fee settings), not Layer 2 problems (bad bot infrastructure). Before switching bots because trades feel “slow,” check your priority fee and Jito tip settings first. The next sections show you exactly what numbers to use.
📌 Do You Need a Paid RPC?
Most retail traders don’t. If you’re using consumer bots like Trojan, Axiom, GMGN, or BONKbot, your biggest speed gains come from fee/tip/slippage presets — not infrastructure. The bots manage their own RPC connections.
Consider paid RPC or custom infrastructure only if you’re consistently missing fills after optimizing your settings — and even then, you’d typically be building your own bot, not using a consumer product.
When Speed Actually Matters vs. When It Doesn’t
This is the section most “fastest bot” articles skip. It’s easier to say “speed is everything” than to explain the scenarios where it’s irrelevant.
| Scenario | Speed | What Matters More | Action |
|---|---|---|---|
| Pump.fun launch snipe | Critical | Tip size + submission speed. Milliseconds = slots = price difference. | Scenario 1 presets ↓ |
| Pump.fun → PumpSwap / Raydium migration | Important | Slippage settings matter more. Wrong slippage = failed trade. | Scenario 2 presets ↓ |
| Established memecoin ($5M+ mcap) | Low | Routing quality and slippage. Deep liquidity means seconds don’t change your fill. | Scenario 3 presets ↓ |
| Large cap (SOL, JUP, BONK) | Irrelevant | Any bot. Use whichever UI you prefer. | Use the test preset ↑ |
| Copy trading | Important | Detection speed (how fast the bot sees the target wallet’s tx). Bot infrastructure, not your settings. | Choose bot with dedicated copy engine |
The takeaway: If you’re not sniping launches, “fastest bot” is probably not your most important criteria. Your slippage and priority fee settings will impact results far more than which bot you choose.
Speed Architecture: What Makes the Fastest Solana Sniper Bot in 2026
Instead of repeating what each bot does generally (see the full comparison for that), here’s what differs specifically for speed — pulled from official documentation where available.
Trojan — Multi-Provider Broadcast Network
Speed-relevant details (from official sniper docs):
- Broadcast providers: Trojan’s sniper documentation names three: Jito, NextBlock, and Temporal. Multiple providers add redundancy — if one route is congested, the tx goes through another.
- BOLT instant swap: Trojan’s marketing describes standard swap execution as “less than 2 seconds.”
- Sniper tip split: The official sniper docs recommend 20% to priority fee / 80% to tip. Example: if your total fee budget is 0.1 SOL, set Fee at 0.02 and Tip at 0.08. Unlike normal swaps where fee and tip are merged, Trojan’s sniper keeps them separate for precise control.
- Priority presets (from official FAQ): Fast = 0.0015 SOL, Turbo = 0.0075 SOL. Custom option available.
- MEV Protection: Via Jito Slots — makes your tx invisible to mempool scanners. Can be enabled separately for buys vs. sells.
Speed trade-off: Telegram’s server latency adds ~100–300ms to the UI response for manual trades. For sniper mode (automated), this doesn’t apply — the bot submits directly from its backend.
Axiom — Turbo Mode + Dynamic Fee Adjustment
Speed-relevant details (from official fees docs):
- Turbo Mode: Automatically adjusts the ratio of priority fee vs. bribe (validator tip) to beat other transactions in current network conditions. You don’t manually split them — Axiom’s algorithm decides.
- Three MEV modes with direct speed impact:
- Off — Fastest. No protection. Your tx is visible in mempool.
- Reduced — Routes via Jito. Faster than Secure but some validators may still see your tx.
- Secure — Waits for a whitelisted validator. The official docs state this “may be slower” — but it’s the strongest MEV protection available.
- Default fees: Priority = 0.001 SOL, Bribe = 0.001 SOL. Presets available for quick switching based on market conditions.
- Dynamic recommendations: Axiom surfaces suggested fee levels based on real-time network congestion — useful for traders who don’t want to guess.
Speed trade-off: Secure MEV mode adds noticeable latency. For launch sniping, switching to Off or Reduced and raising the bribe is the play. For swing trades, Secure is the correct choice.
Bloom — Degen Mode for Launch Speed
Speed-relevant details:
- Degen Mode: Pre-configured aggressive settings for instant buying on new launches. Designed to eliminate the time you’d spend manually adjusting settings for each snipe.
- AFK Mode: Automated sniping that runs in the background — buys new tokens matching your filters without manual input.
Speed trade-off: Degen Mode’s aggressive defaults (reportedly high slippage tolerance) mean you’ll get filled fast but at potentially poor prices. Speed without price awareness is paying more for worse entries.
Bloom’s speed features are designed for high-risk scenarios. Aggressive defaults can cause significant losses. Only use with position sizes you can afford to lose entirely.
GMGN — Best Tracker, Not a Speed Executor
Speed-relevant difference: GMGN is primarily positioned as a tracker and signal tool — its core strength is detecting what to buy (smart money alerts, wallet tracking), not executing the fastest possible transaction. During heavy congestion, execution speed may vary more than with Trojan’s or Axiom’s dedicated infrastructure.
Practical approach: Use GMGN for signals → execute via Trojan or Axiom when speed matters.
BONKbot — Simple Execution, Fewer Speed Controls
BONKbot can be accessed via Telegram or its web terminal called Telemetry (app.telemetry.io). Same wallet, same trades — different interface.
- Telegram-native with a streamlined swap flow designed for quick trades.
- Routing powered by Jupiter aggregation combined with BONKbot’s own routing logic for best price across Solana DEXes.
- Fewer advanced fee/tip controls compared to Trojan — you get simplicity at the cost of fine-tuning.
Best for: Quick swaps and small positions where you don’t need granular control over tip splits and MEV modes. Not ideal for competitive launch sniping where precise fee tuning makes the difference.
Speed Settings Template (Pump.fun / Raydium): Priority Fee + Jito Tip Presets
These use actual numbers from each bot’s official documentation. Start with the lowest preset that lands reliably, then raise gradually.
Bots update their defaults and fee structures regularly. Treat these presets as tested starting points — always verify against the bot’s current settings screen before trading. Numbers below were confirmed against official docs as of February 2026.
Scenario 1: Pump.fun Launch Snipe — Priority Fee + Jito Tip Presets
You’re competing with other bots to buy within the first few blocks of a launch. Every setting should favor speed over cost.
For Pump.fun snipes, find new launches on Pump.fun’s official page and verify on Dexscreener before buying. Never buy from random contracts posted in replies or DMs.
| Setting | Trojan (sniper docs) | Axiom (fees docs) |
|---|---|---|
| Priority Fee | Turbo (0.0075 SOL) or Custom higher | Raise to 0.005–0.01 SOL |
| Tip / Bribe | 0.01–0.05 SOL (80% of total fee budget) | 0.01–0.05 SOL via Turbo Mode |
| Tip Split Rule | 20% fee / 80% tip (official recommendation) | Turbo Mode auto-adjusts ratio |
| Slippage | 15–25% (default is 15%) | 15–25% |
| MEV Protection | OFF for maximum speed | OFF or Reduced (Secure adds latency) |
| Buy Amount | 0.1–0.5 SOL max | 0.1–0.5 SOL max |
⚠ Aggressive Settings — Read First
These are for competitive sniping only. High slippage (15–25%) means you’re accepting bad fills in exchange for speed. Only use amounts you can afford to lose entirely. Start with the lowest values and increase only if trades are consistently failing.
Ready to test these presets?
Start with a 0.1 SOL test on a high-liquidity token before sniping any launch. For a detailed breakdown of what each slippage percentage means in practice, see our slippage settings guide.
Scenario 2: Migration Buy — Slippage + MEV Protection Presets
Token migrates from Pump.fun bonding curve to PumpSwap or Raydium. There’s a buying window, but it’s wider than a launch snipe — and sandwich attacks are more likely on larger sizes.
| Setting | Trojan | Axiom |
|---|---|---|
| Priority Fee | Fast (0.0015) to Turbo (0.0075) | 0.001–0.005 SOL |
| Tip / Bribe | 0.005–0.01 SOL | 0.005–0.01 SOL |
| Slippage | 5–12% | 5–12% |
| MEV Protection | ON (Jito Slots) | Reduced or Secure |
| Buy Amount | 0.1–1.0 SOL | 0.1–1.0 SOL |
For this scenario, MEV protection is worth the speed trade-off. Migration windows last longer, and sandwich attacks on unprotected larger trades can cost more than the few seconds you’d save.
Scenario 3: Swing Trade on Established Token (Speed Irrelevant)
Token has $5M+ market cap and deep liquidity. Minimize costs.
| Setting | Any Bot |
|---|---|
| Priority Fee | Low / Default (Trojan: Fast 0.0015, Axiom: 0.001) |
| Tip / Bribe | Not needed or minimal |
| Slippage | 0.5–3% |
| MEV Protection | ON (Axiom: Secure mode) |
Your priority here is best fill price, not speed. Low fees, tight slippage, full MEV protection.
The Speed vs. Cost Break-Even Math
Every speed increase costs SOL. Here’s how to calculate whether it’s worth it.
Formula
(Priority Fee + Tip + Bot Fee) ÷ Buy Amount = Minimum % gain to break even
| Buy Size | Priority + Tip | Bot Fee (~1%) | Total Cost | Break-Even |
|---|---|---|---|---|
| 0.1 SOL | 0.0075 + 0.03 = 0.0375 | 0.001 | 0.0385 SOL | 38.5% |
| 0.1 SOL | 0.0015 + 0.005 = 0.0065 | 0.001 | 0.0075 SOL | 7.5% |
| 0.5 SOL | 0.0075 + 0.03 = 0.0375 | 0.005 | 0.0425 SOL | 8.5% |
| 1.0 SOL | 0.0015 + 0.005 = 0.0065 | 0.01 | 0.0165 SOL | 1.65% |
What this table shows: Aggressive speed settings (Turbo + high tip) on tiny positions are mathematically destructive. A 0.1 SOL buy with full speed settings needs a 38.5% pump just to break even — and that’s before slippage.
Practical rules by position size:
- Position ≤ 0.1 SOL: Use Fast (0.0015) + minimal tip. High speed settings are unprofitable at this size.
- Position 0.1–0.5 SOL: Turbo (0.0075) + tip 0.005–0.015 SOL is the sweet spot for launch sniping.
- Position 0.5–2.0 SOL: You can afford aggressive tips (0.01–0.03) when speed genuinely matters.
- Position 2.0+ SOL: MEV protection becomes more important than raw speed. Sandwich attacks on unprotected large orders can cost far more than a few seconds of delay.
Want to start safely? A total fee budget of ~0.02 SOL (roughly Fast + modest tip) gives reasonable speed without destroying your break-even on smaller positions.
For a deep dive on priority fees, see our priority fees guide.
FAQ
Is Trojan faster than Axiom?
Different layers, different strengths. Axiom’s web UI responds faster for manual trading (no Telegram round-trip). Trojan’s sniper feature submits directly from backend infrastructure using multiple broadcast providers (Jito, NextBlock, Temporal), which can be faster for automated sniping. For launch snipes, both are competitive — your tip/fee settings matter more than the bot choice. Some third-party reviews describe both as fast in typical retail conditions, but exact milliseconds vary by network congestion and fee settings.
What’s the recommended Jito tip for Pump.fun launches?
Trojan’s official sniper docs recommend a 20/80 split: 20% to priority fee, 80% to tip. For a total fee budget of 0.05 SOL, that’s 0.01 SOL priority + 0.04 SOL tip. Start lower (0.02 SOL total) and increase if trades are consistently failing. If trades land but fills are bad, the problem is slippage, not the tip — see our slippage guide.
Should I turn MEV protection off for speed?
Only for launch sniping where you’re competing for first blocks. MEV off = your transaction is visible in mempool = sandwich risk. Axiom’s official docs describe Secure mode as waiting for whitelisted validators, which adds latency but provides the strongest MEV protection available. For any trade above 0.5 SOL on established tokens, keep MEV protection on.
Do I need a paid RPC for sniping?
Most retail traders don’t. Consumer bots manage their own RPC infrastructure. Paid RPCs (QuickNode, Helius) are mainly relevant for developers building custom bots. Focus on your fee/tip settings first — that’s where the biggest speed gains are for consumer bot users.
Can I snipe on mobile?
Yes, via Telegram bots (Trojan, Bloom, BONKbot, GMGN). Axiom works in mobile browsers but performs better on desktop. For competitive launch sniping, desktop with a stable connection is recommended — though Trojan’s sniper mode runs server-side regardless of your device.
My trades keep failing during launches. Is my bot too slow?
Almost certainly a settings issue, not a speed issue. Check in order: (1) Slippage — during launches, 15–25% may be needed. Trojan’s default is 15%, which is a reasonable starting point. (2) Priority fee + tip — are they high enough relative to competition? (3) SOL balance — do you have enough for the trade + all fees? See the full troubleshooting guide.
Should I use multiple bots?
Many active traders do. A common setup: Trojan for sniping (multi-provider broadcast + dedicated sniper feature) + Axiom for manual trading and portfolio view (fastest web UI + Turbo Mode) + GMGN for smart money signals (wallet tracker). This also gives you a backup if one platform has downtime during a critical moment.
Is Auto-Sell guaranteed to execute?
No. Auto-Sell, Limit Sell, and TP/SL orders on any bot are best-effort, not guaranteed. If liquidity dries up, the token rugs instantly, or the network is heavily congested, your order may not fill at the exact price — or at all. Think of Auto-Sell as a safety net that works most of the time, not a guarantee. That’s why the sell test matters: confirm the full buy → sell cycle works before sizing up.
What’s the difference between Limit Sell and Market Sell?
Market Sell = sell now at whatever price is available. Fast, but you accept the current spread and slippage. Limit Sell (used by TP/SL orders) = sell only when the price hits your target. More control, but the order won’t execute if the price never reaches your level — or if it crashes through your level too fast for the bot to fill. For fresh memecoins, most bots use limit-style orders for TP/SL. If you need an emergency exit right now, use the manual sell button (or Axiom’s Panic Sell) instead of waiting for a limit to trigger.
If the chart is collapsing and your TP/SL hasn’t triggered, don’t wait. Hit the manual sell button immediately.
Trojan: Open token → tap Sell → choose 100% → confirm
Axiom: Dashboard → Panic Sell button (instant market sell)
Any bot: Open your position → sell 100% at market. Raise slippage to 15–25% and retry once (emergency only).
Only use high slippage (15–25%) for emergency exits when you must get out NOW — not for normal sells.
A bad fill is better than no fill. If a token is rugging, getting out at −40% beats holding to −95%.
📌 Related Guides
Best Solana Trading Bots (2026) — Full Comparison
Best Slippage Settings for Solana Bots